Mechanical Engineering MS Program

The Master of Science (MS) degree is awarded upon successful completion of a minimum of 36 credits with a minimum of 3.0 cumulative GPA. Individual courses require a minimum of a B- grade for course credit.  

Duration of Study

Students are responsible for planning their graduate program in consultation with their Academic Advisor. Students must meet all deadlines and be aware that most Core Courses are offered only once per academic year.

Students are expected to complete the MS degree as follows:

  • MS (Non-Thesis)- three Semesters and one Summer Session.
  • MS (Thesis)- four Semesters and one Summer Session.

Students must complete their Thesis by the end of the fourth Semester (not including the Summer Session). Students who require additional time to complete their Thesis must apply for an extension per the time limits and extensions policy.

Assessment Test

To facilitate the design of an individual study plan, all admitted students must take a written assessment test when they arrive on campus. The assessment determines whether students have mastered the prerequisites for undertaking graduate-level courses taught in the program. The exam will focus on mathematics and basic sciences. Students must prepare for the test by refreshing the general knowledge gained from their undergraduate education before arriving at KAUST. The study plan requirements must be satisfactorily completed, in addition to the university degree requirements.

In the case of failure of the assessment test MS students are mandated to take 100-level courses and will be graded Satisfactory (S) or Unsatisfactory (U) for these courses but do not receive academic credit toward their degree. Students mandated to take the full Fall Semester of the PGDip Program and who wish to transfer to the PGDip Program in the Spring Semester must apply to do so before Week 1 of the Spring Semester.

MS Course Requirements

MS students must complete the following requirements:

  • Core Courses (12 credits)
  • Mathematics Courses (6 credits)
  • Laboratory Course (3 credits)
  • Elective Courses (6 credits)
  • Research/Capstone (9-12 credits)
  • Graduate Seminar 398 (non-credit)
  • Winter Enrichment Program (non-credit)

Core and Elective Courses must be technical courses and cannot be substituted with Research, Internship, or Broadening Courses to fulfill degree requirements.

Core Courses (12 credits)

Core Courses provide students with the background needed to establish a solid foundation in the program area. Students must complete 12 credits (4 Core Courses) and be aware that Core Courses may be offered only once per academic year.

ME 200AIncompressible Flows

3

ME 200BViscous and Unsteady Flows

3

ME 211AMechanics of Structures and Solids

3

ME 211BHomogenization and Upscaling Techniques in Solid Mechanics

3

ME 212Continuum Mechanics

3

ME 221A/ECE 271ALinear Control Systems

3

ME 221B/ECE 271BNon Linear Control Systems

3

ME 222A/ECE 272AMechatronics and Microsystems

3

ME 222B/ECE 272BMechatronics and Intelligent Systems

3

ME 241Classical Thermodynamics

3

ME 242Theoretical and Numerical Heat Transfer

3

ME 243Statistical Thermodynamics

3

Mathematics Courses (6 credits)

Students must pass at least two graduate-level courses (i.e., courses numbered 200 and higher) in applied mathematics (AMCS) or statistics (STAT). It is recommended that students take the following courses which will provide a strong foundation of the skills required for a research career in ME.

AMCS 201Applied Mathematics I

3

AMCS 202Applied Mathematics II

3

Other courses listed in the AMCS/ STAT master's program can be taken to fulfill this requirement.

Elective Courses (6 credits)

Elective Courses allow students to tailor their educational experience to meet individual research and educational objectives with the permission of the Academic Advisor. It is advised that students take courses from the ME program as per the list below:

ME 214/ERPE 270Experimental Methods

3

ME 226/ECE 263Cyber-Physical Systems

3

ME 228/ECE 275Robot Planning and Control

3

ME 244Combustion Fundamentals

3

ME 252Fundamentals of Circular Carbon Strategies

3

ME 253Sustainable Thermal Technologies

3

ME 254Renewable Fluid Power

3

ME 256Electrochemical Energy Systems

3

ME 261Applications of Atmospheric Pressure Plasmas

3

ME 302Multi-Phase Flows

3

ME 304Experimental Methods in Fluid Mechanics

3

ME 305AComputational Fluid Dynamics

3

ME 305BAdvanced Computational Fluid Dynamics

3

ME 306Hydrodynamic Stability

3

ME 307Turbulence

3

ME 317Mechanics of Composite Materials and Structures

3

ME 319Computational Solid Mechanics

3

ME 326/ECE 376Robust Control

3

ME 340Advanced Combustion Theory

3

ME 342Chemical Kinetics

3

ME 346Turbulent Combustion

3

ME 348Introduction to Spectroscopy and Laser Diagnostics

3

ME 376Introduction to Combustion Engines

3

ME 377Advanced Internal Combustion Engines

3

ME 378Experimental Combustion

3

ME 394Contemporary Topics in Mechanical Engineering

3

200-300 level courses from other KAUST programs upon approval of the Academic Advisor.

Laboratory Courses (3 credits)

It is imperative that ME students possess specific laboratory skills to have successful careers in academia and industry. All MS ME students must register and pass ME 205 which is is designed to train students in basic laboratory skills relevant to Mechanical Engineering. 

 

Graduate Seminars (non-credit)

Students must register and receive a satisfactory grade in at least two seminar courses offered by the ME Program. Students must attend a minimum of 8 Graduate Seminars to receive a Satisfactory (S) grade. The seminars can be chosen from any Graduate Seminar series offered by the PSE division.

Winter Enrichment Program (non-credit)

All students must register for WE 100 and successfully complete one Winter Enrichment Program (WEP), usually taken in the first year of study. 

MS Thesis

Students planning to pursue the Thesis option must complete a minimum of 12 credits of Thesis Research (ME 297).

Thesis Application

Students must complete the application and have it approved by the Program Chair no later than the end of week one of their third Semester. The Thesis Advisor must be a full-time program-affiliated Assistant, Associate, or Full Professor at KAUST. The Thesis Advisor can only become project affiliated for the specific thesis project with the Program Chair’s approval. The application must include a Thesis Proposal endorsed by the Thesis Advisor and a timeline for completion.

Students who meet the graduation requirements of the non-thesis track may drop the thesis up until the end of their third Semester. Students not able to complete their thesis after this deadline will face academic dismissal.

Thesis Committee Formation

Students must form the Thesis Committee by the deadline published in the Academic Calendar. The Thesis Defense Committee, which must be approved by the Dean, must consist of at least three members and typically includes no more than four members. At least two of the required members must be KAUST Faculty. This membership can be summarized as follows:

Member Role Program Status
1 Faculty Non-Program-affiliated KAUST faculty
2 Faculty Within program
3 Chair Outside program, inside KAUST
4 Optional Faculty or Research Scientist Inside or outside KAUST

Notes:

  • Members 1-3 are required; member 4 is optional
  • Faculty members holding secondary affiliation with the ME Program may serve as member 1 or 2 but not as member 3 
  • Adjunct Professors and Professor Emeriti may retain their roles on current committees but may not serve as chair on any new committees 
  • Professors of Practice and Research Professors may serve as members 2, 3, or 4 depending upon their affiliation with the program, and they may also serve as co-advisors 
  • Visiting Professors may serve as member 4 

View a list of Faculty and their affiliations here.

Petition to Defend Thesis

Students must submit a petition to defend their Thesis by the deadline published in the Academic Calendar. Students are responsible for scheduling the Thesis Defense Date. All committee members must attend the Defense.

Thesis Defense

The format of the oral Defense is left to the discretion of the Thesis Committee. Students defending their Thesis receive an outcome of Pass or Fail. A Pass is achieved when the Committee agrees with no more than one dissenting vote; otherwise, the outcome is a Fail. In the case of a Pass, students must send the Thesis Result Form within 2 days of the Thesis Defense to the GPC. In the case of a Fail, the Committee Chair must inform the GPC immediately to take the necessary action. Students must submit the Final Approval Form by the deadline published in the Academic Calendar.

Thesis Document

Students must follow the Thesis and Dissertation Guidelines available from the KAUST Library when they write their Thesis. Once the Thesis is ready to be examined, students must determine the Defense date with the agreement of all members of the Thesis Committee.

Thesis Archiving

Students must archive the Thesis in the KAUST Library two weeks from the final result form. This must not exceed the duration of study or the deadline published in the Academic Calendar.

MS Non-Thesis

Students wishing to pursue the non-thesis option must complete a total of 9 capstone credits, with a maximum of 6 credits of Directed Research (ME 299). Students must complete the remaining 3 credits through one or a combination of the options listed below: